Made from 100% biodegradable cellulose fiber, BioGuard EcoKlean is an earth friendly and effective alternative to DE for delivering a diamond like sparkle to your pool. After the first use, filtration run cycles increase by up to 70% when compared to those of DE. And since 3 lbs of EcoKlean is equivalent to 25 lbs of DE, it creates a smaller, more earth friendly footprint.
- 100% biodegradable cellulose fiber
- Earth friendly and effective alternative to DE
- Filtration run cycles increase by up to 70%
- 3 lbs of EcoKlean is equivalent to 25 lbs of DE
- 23759 – 3 LB Package
DIRECTIONS FOR USE: Read entire label and use strictly in accordance with precautionary statements and directions. Prior to application: You will need to prepare your D.E. filter prior to applying EcoKlean. 1. Backwash your D.E. filter to remove D.E. from the grids. 2. Disassemble your filter and suing a water hose, wash all remaining D.E. from the filter grids. 3. Once the D.E. is removed and the frids are clean, reassemble your filter and install into circulation system. 4. You only have to prepare your D.E. filter once before starting to use EcoKlean. To Apply EcoKlean in D.E. Type Filter: 1. Open the skimmer lid and remove the skimmer basket. 2. With your pump running and your skimmer working, add 3 cups of EcoKlean per 12 ft filtration area. EcoKlean should be added directly into the skimmer several cups at a time. 3. Replace the skimmer basket and operate the filtration system normally. To Enhance Pool Clarity with Sand Filters: 1. Backwash your filter 2. Open your skimmer lid and remove the skimmer basket. 3. With your pump running add 8 cups per 2 ft filtration area of EcoKlean directly into skimmer several cups at a time. 4. Replace your skimmer basket and operate the pump and giltration system for a minimum of 24 continuous hours. For best results backwash your filter after 48 hours to remove dirt and debris. To Enhance Cartridge Filter Performance: 1. Clean your filter cartridge with BioGuard Kleen It® per label directions. 2. With clean filter cartridge in place, remove the skimmer lid and skimmer basket. 3. With your pump running, add 12 cups per 50 ft of cartridge surface area of EcoKlean filter media, directly into the skimmer, sevreal cups at a time. 4. Replace your skimmer basket and skimmer lid. Operate your pump and filter for a minimum of 24 continuous hours. 5. After 48 hours remove the dirty filter cartridge and rinse cartridge using a water hose then clean the cartridge using BioGuard Kleen It® per label directions. To determine your filter’s square footage area, refer to your filter’s owners manual, the information plate on the filter or consult your BioGuard Dealer.